Logo Subtech

PRODUCTS - CUTTERS

TITAN™ 150

Titan 150

High-powered air cutter for lines 140–375mm (5¾–15").

Delivering 1.3 kW (1¾ hp) at 12,000 rpm, the air-powered Titan 150 cuts most any pipe or liner material rapidly, cleanly and precisely. Lightweight hose design allows the cutter to travel as far as 120 m. With two-axis articulation, the cutter arm reaches up 220 mm / 9" (400 mm /16" with additional equipment), sweeps 400 degrees, and also performs horizontal front cutting. Variable-speed arm articulation and creeping ensure maximum cutting precision. An integral water-flushed pan/tilt color camera delivers real-time footage.

The Titan 150 accepts diamond-impregnated, hardened-steel cutting bits, which deliver long-lasting performance thanks to onboard water cooling. Hundreds of bit styles are available, with the more popular options shown here.

Titan™ 150

  • Delivers 1.3 kW / 1¾ hp at 12,000 rpm without overheating.
  • Travels up to 120 m / 400' with lightweight hose.
  • Arm reaches 225 mm / 9" (400 mm / 16" with additional equipment), sweeps 400 degrees, and also performs horizontal front cutting.
  • Variable-speed arm articulation delivers precise cutting without constant joystick manipulation.
  • Variable crawl speed allows precise cutter feed.
  • Captures real-time footage with water-flushed color pan/tilt camera.
  • Diamond-impregnated, hardened-steel bits last longer with water cooling.
PDF Downloads

PDF Download

TITAN™ 250

Titan 250

High-powered air cutter for lines of 230–600 mm (9–24").

Delivering 4.5 kW / 6.5 hp at 7200 rpm, the air-powered Titan™ 250 cuts any pipe or liner material rapidly, cleanly and precisely. Lightweight hose design allows the cutter to travel as far as 120 m / 400'. With two-axis articulation, the cutter arm reaches up 250 mm / 10" and sweeps 400 degrees. Optional accessories install in under five minutes to extend reach to 600 mm / 24". Variable-speed arm articulation and creeping ensures maximum cutting precision. An integral pan/tilt water-flushed camera delivers real-time cutting footage. The extension add-on has an additional pan/tilt camera, which is also water flushed.

The Titan™ 250 accepts diamond-impregnated or hardened-steel cutting bits, each delivering long operating life thanks to onboard water-cooling.

Titan™ 250

Optional Accessories:

1. Delivers 200 mm / 8" reach into laterals larger than 80 mm / 3.375", with 1.3 kW / 1.8 hp cutting.

2. Delivers 250 mm / 10" reach into laterals larger than 125 mm / 5", with 2.2 kW / 3.0 hp cutting.

3. Delivers 600 mm / 24" reach into laterals larger than 125 mm / 5", with 0.6 kW / 0.3 hp cutting and integral water-flushed color camera.

TITAN™ 250 TITAN™ 250 TITAN™ 250

PDF Downloads

PDF Download
SUBTECH GmbH

Von Monschaw-Straße 4
47574 Goch, Germany
Telephone: +49 (0) 28 23 . 93 92 27
Fax: +49 (0) 28 23 . 93 92 29
E-Mail: info@subtech.info
CONTACT

Do you have any questions or want more information? Then use our contact form. We will get in touch with you.

click
LOCATION

Just use the route planner by map24.de. Just put in your starting address and the routing is calculated automatically.

click